Do not overtighten the walking belt: There should be about three inches of space when you lift the belt upward. WarningsÄo not work with any of the internal parts of the treadmill while the treadmill is plugged into an electrical source. ![]() Turn both rear roller bolts with the Allen wrench a 1/4 turn for a slipping walking belt. Turn it clockwise a 1/2 turn for shifting to the left, and counterclockwise a 1/2 turn for shifting to the right. Turn the left rear roller bolt with the Allen wrench. Walking Belt Is Off Center or Slips When in Use Reset the reed switch and magnet in the console by removing the treadmill hood and tightening the pulley on the left of the magnet until the magnet is aligned with the reed switch. ![]() ![]() Using the allen wrench, turn both cising, the unique EXP2000 can be folded up, requiring treadmill (see the front cover of this manual for the rear roller adjustment bolts counterclockwise, 1/4 of a less than half the floor space of other treadmills. Wait five minutes before flipping the breaker switch back to reset. Whether youve got a spare five minutes or half treadmill for about the nordictrack exp 2000 xi treadmill review price. Reset the treadmill's circuit breaker located on the frame of the treadmill near the power cord.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |